Dual XDVDN8290N Bedienungshandbuch PDF herunterladen (Seite 30)

XDVDN8290N OPERATION

ASP Config - Audio Settings

Notes:

Bass Freq

Treble Freq

Sub Filter

Sub Phase

Bass Q-Factor

These settings affect the quality of the audio in "Downmix" mode only and

are primarily for use by a professional installer. For the casual user, it is

recommended to only adjust the general sound quality by using the Audio Setup

Menu, which is accessed by pressing the SEL button on the remote or pressing

the rotary for 3 seconds.

Sets the bass center frequency for optimal bass effect.

Choices are 60, 80, 100, 130, 150 and 200Hz.

Sets the treble center frequency for optimal treble effect.

Choices are 10, 12.5, 15 and 17KHz.

Sets the subwoofer crossover frequency which affects the subwoofer’s low-pass

filter and the “SMALL” speakers’ high-pass filter.

Choices are 80, 120 and 160Hz.

Notes: This setting has no effect when the subwoofer is set to “OFF” and/or if any

other speaker is set to "LARGE".

Sets the phase of the subwoofer. Depending on the installation, this setting can

be used to change the relative phase of the subwoofer output in relation to the

other speakers.

Choices are 0˚ and 180˚.

This setting alters the sharpness or "Q factor" of the bass output.

Choices are 1.0, 1.25, 1.5 and 2.0.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 87 88

Keine Kommentare

Dual XDVDN8290N Bedienungshandbuch Seite 30